PHMSA Research and Development
Time: 11/23/2009 09:57 PM

A Comprehensive Update in the Evaluation of Pipelines Weld Defects

Project Categories

Click on any category to see other projects in this category.

Main Objective

This project will provide a major update to the alternative girth weld defect acceptance criteria. The focus of the project will be in two primary areas: a) To update the alternative defect acceptance criteria to address the immediate need of pipeline construction in the USA, typically with pipeline longitudinal strains less than 0.5%; and b) To develop alternative defect acceptance criteria for ultrahigh strength pipelines (e.g., X100) in geotechnically challenging environments, such as arctic areas and deep water offshore. Update Appendix A of API Standard 1104 for girth weld defect acceptance criteria as specified in Federal regulations (49 CFR, Parts 192 and 195), to reflect the increased use of mechanized welding and automated ultrasonic testing in new pipeline construction.

Articles and Papers
Paper to be presented titled "Inherent Safety Factors in the API Girth Weld Defect Tolerance Analysis – Part II"
Quarterly Status Reports
Report for Period September 9, 2003 - December 31, 2003.
Report for Period January 1, 2004 - March 31, 2004.
Report for period April 1, 2004 - June 30, 2004.
5th Quarterly Report for period ending December 31, 2005.
One Year Progress Report submitted November 15, 2004.
QuarterlyReport2005Q1 DTRS56-03-T-0008 Submitted13May2005FinalpPublic
Public Page of the 8th Quarterly Report Ending September 30, 2005
Public page of the quarterly status report ending December 31, 2005
Public page for the first quarter of 2006
public page of the 2nd quarter 2006 report
12th Quarterly Report - Public Page
PHMSA Home | Pipeline Safety Website | Feedback | Privacy Policy | FOIA