PHMSA Gas Transmission (GT) Integrity Management
Time: 05/25/2013 05:43 AM
Rule Section: §192.935(b)
PHMSA Home |
Pipeline Safety Website |
Third Party Damage and Outside Force Damage.
What additional preventive and mitigative measures must an operator take?
- 192.935(b) Third Party Damage and Outside Force Damage.
- Third party damage. An operator must enhance its damage prevention program, as required under §192.614 of this part, with respect to a covered segment to prevent and minimize the consequences of a release due to third party damage. Enhanced measures to an existing damage prevention program include, at a minimum-
- Using qualified personnel (see §192.915) for work an operator is conducting that could adversely affect the integrity of a covered segment, such as marking, locating, and direct supervision of known excavation work.
- Collecting in a central database information that is location specific on excavation damage that occurs in covered and non covered segments in the transmission system and the root cause analysis to support identification of targeted additional preventative and mitigative measures in the high consequence areas. This information must include recognized damage that is not required to be reported as an incident under Part 191.
- Participating in one-call systems in locations where covered segments are present.
- Monitoring of excavations conducted on covered pipeline segments by pipeline personnel. If an operator finds physical evidence of encroachment involving excavation that the operator did not monitor near a covered segment, an operator must either excavate the area near the encroachment or conduct an above ground survey using methods defined in NACE RP-0502-2002 (ibr, see §192.7). An operator must excavate, and remediate, in accordance with ANSI/ASME B318.S and §192.933 any indication of coating holidays or discontinuity warranting direct examination.
- Outside force damage. If an operator determines that outside force (e.g., earth movement, floods, unstable suspension bridge) is a threat to the integrity of a covered segment, the operator must take measures to minimize the consequences to the covered segment from outside force damage. These measures include, but are not limited to, increasing the frequency of aerial, foot or other methods of patrols, adding external protection, reducing external stress, and relocating the line.
Related Protocol Questions:
05/25/2013 05:43 AM
Processing: 0.08 sec.
Browser: [unknown] [unknown]